Home Authors Posts by Kyle@STILLEN

Kyle@STILLEN

369 POSTS 0 COMMENTS

http://www.stillen.com

New 2013 Nissan Juke Nismo Aftermarket Parts

Jun 28, 2013

STILLEN is pleased to announce new performance parts and accessories available for the 2013 Nissan Juke Nismo. The Nismo edition of the Nissan Juke is a new option for 2013 with both upgrades in styling and performance.

New Juke Nismo Aftermarket Parts

Nissan Juke Nismo Axle-back Exhaust

The Nissan Juke Nismo axle-back exhaust system bolts on to the stock mid pipe and has seen a power increase of 12 horsepower at the wheels! Constructed from 304 Stainless Steel, the polished rear section exhaust is built to last and comes with a limited lifetime warranty. Fits both FWD and AWD Juke models.

Nissan Juke Nismo Cat-back Exhaust

The mandrel bent, 304 Stainless Steel constructed Nissan Juke Nismo cat-back exhaust combines the STILLEN axel-back exhaust and the STILLEN mid-pipe for up to a 20 horsepower increase at the wheels! Like all other STILLEN exhaust systems, the Juke Cat-back exhaust also carries a limited lifetime warranty. Fits both FWD and AWD Juke models.

Nissan Juke Nismo Front Strut Tower Brace

The Nissan Juke Nismo front strut tower brace is a simple bolt-on that noticeably improves handling and chassis rigidity. This reduces body roll and makes for a more enjoyable drive. Will NOT work with Injen Short Ram Intake.

Nissan Juke Nismo Injen SP Series Short Ram Intake

Nisaan Juke Nismo Injen SP Series Cold Air Intake

These Nissan Juke Nismo SP Series Intake Systems from Injen feature a patent pending MR technology process for optimal power increase and a safe air/fuel ratio. Injen SP Series is the world’s first tuned intake system and is made in the USA. Both Short Ram and Cold Air options come standard with dry filters for easy cleaning and are available in both polished and black finishes.

For more information on any of these products for the 2013 Nissan Juke Nismo, please give us a call at (866) 250-5542 or visit www.stillen.com

Getting Maximum Horsepower with Chevy Camaro SS Headers & Exhaust

Jun 26, 2013

We’ve been doing quite a few superchargers here in the STILLEN Performance Shop lately, but we know that not everyone is in the market for forced induction. There are definitely more ways to squeeze a few horses and great sound out of your engine without the investment of a supercharger. This 2011 Chevy Camaro SS went the way of an exhaust upgraded. JBA Headers up front, through the stocks cats, and a Magnaflow catback exhaust to finish up the rear.

JBA Cat4Ward Shorty Camaro SS Headers

The Camaro SS JBA Cat4Ward Shorty Headers are mandrel-bent stainless steel primary tubes with patented JBA Firecone® collector for durability and maximum flow. The JBA Firecone® merge collector helps to maintain the direction and speed of the exhaust flow for a noticeable increase in power and efficiency. These Chevy Camaro SS headers are 50 state CARB legal and are dyno proven power and torque gains.

Magnaflow Street Series Catback Exhaust Dual Split Rear

The Chevy Camaro Magnaflow cat-back exhaust system is mandrel-bent stainless steel tubing, straight through stainless steel Magnaflow Performance mufflers and polished stainless steel rear exit tips. These exhaust systems offer a deep gratifying exhaust tone along with increased exhaust flow designed to produce power gains.

For more information on any of the Chevy Camaro SS products mentioned above or on other performance options for your vehicle, give us a call at (866) 250-5542.

Magnuson Supercharged Chevy SSR at the STILLEN Performance Shop

Jun 25, 2013

A rare sight to see a Chevy SSR on the road and even less likely to see one in the STILLEN Performance Shop. These Super Sport Roadsters were only built from 2003 to 2006. The early models had a 5.3L Vortec V8 producing around 300 HP. The later models got a LS2 motor and pushed closer to 400HP, so it’s no surprise that the owner wanted to drop a Magnuson Supercharger on this 2003.

This SSR is definitely one of the cleanest we have seen in the shop, complete with a fresh ghost flame paint job and air bag suspension.

Chevy SSR Stock Engine Bay

Chevy SSR Magnuson Supercharger Installed

NEW PRODUCT: Whipple Superchargers

Jun 24, 2013

STILLEN is proud to announce the relationship with Whipple Superchargers!

STILLEN and Whipple Superchargers have just signed a new agreement ensuring there will be a facility in the Southern California area able to distribute, install, and support all Whipple supercharger systems. For many years STILLEN has been recognized as one of the premier high performance shops in California and Whipple Superchargers have been known to produce the most power of any supercharger system. Now the two will come together to support all of Southern California.

STILLEN is the only recognized and warranty certified installer in the Southern California area for all Whipple Superchargers. When you have your supercharger kit installed by the STILLEN Performance Shop you can rest assured that your vehicle will be eligible for coverage under the Whipple Supercharger 3-year/36,000 mile, 5-year/60,000 mile or even the 5-year/100,000 mile warranty options!

Whipple Superchargers are designed and manufactured in the US and utilize their innovative Twin Screw Compressor technology. This technology is similar in design to the Ford GT supercar and is the only forced induction unit on the market to have a positive displacement design for maximum low-end torque as well as high efficiency for greater top-end horsepower. These supercharger units only require oil replacement every 100,000 miles.

STILLEN Installed Magnuson Camaro SS Supercharger Puts Down 521 HP

Jun 19, 2013

Installing the Magnuson Camaro SS Supercharger

More supercharger goodness here in the STILLEN Performance Shop. This time in the form of a Magnuson Supercharger System dropping into a 2011 Victory Red Chevy Camaro SS. The stock Camaro SS is a 6.2L V8 powerplant that is said to boost 426 horsepower and 420 Foot Pounds of Torque in this 6-speed manual transmission.

Magnuson Camaro SS Supercharger Installed

Pfadt Suspension Installed

Along with the supercharger, we also bolted on a few Pfadt Suspension pieces. The Chevy Camaro SS Pfadt Rear Arm Package includes Rear Trailing Arms and Rear Tie Rods. These stainless steel arms increase strength while reducing overall weight. This allows the Camaro rear suspension to react quicker while keeping the rear tires in contact with the road for greater traction. The Pfadt Rear Arm Packages includes all required upgraded replacement bushings.

Stock Rear Tie Rod and Rear Trailing Arm

Pfadt Rear Tie Rod and Rear Trailing Arm Installed

Pfadt Camaro Front and Rear Adjustable Sport Sway Bars

5th Generation Camaros are notorious for under-steer. The Pfadt Sport Sway Bars eliminate that by providing a proper rate of stiffness and balance. This reduces body roll and increases steering response resulting in a better driving experience. Pfadt Sport Sway Bars include greasable graphite-impregnated polyurethane bushings and new mounting brackets for a complete installation.

Pfadt Rear Sway Bar Installed

After the Pfadt Front and Rear Sway Bars and Rear Arm Package were installed, it went up on the rack for computer alignment to get it back into spec.

Then it was out to the Dyno to see this Magnuson Supercharger in action.

After it was all said and done, the supercharged Chevy put down 521 horsepower and 495 foot pounds of torque!

For more info on any of the performance products installed in this Chevy Camaro SS give us a call at (714) 540-5566 or visit http://www.stillen.com

STILLEN Shop Update: Bringing Out True Nissan Performance

Jun 17, 2013

In addition to the handful of customer vehicles we have been featuring lately, there have plenty of others. Here are just a few Nissans that have come through the STILLEN Performance Shop in Orange County recently.

Nissan Juke Lowering Kit Springs Installation

The owner of this Nissan Juke wanted to minimize wheel well gap without compromising ride quality. The Nissan Juke Eibach Pro-kit Lowering Springs does just that. While only dropping the car around 1.2″ in the front and rear, the Eibach springs still allow plenty of room for the suspension to travel.

2013 Nissan Maxima Intake Installation

At the STILLEN shop, we had a local 2013 Nissan Maxima owner come down to get a STILLEN Nissan Maxima Intake installed. The STILLEN Maxima Intake increases horsepower and torque while utilizing the included genuine K&N air filter. This intake integrates into the factory air inlet directing the fresh air straight into the filter allowing for the best source of fresh air to allow the engine to breath! To complete the performance look each intake is polished to set off the engine bay and add a little extra excitement! Be sure to check out all of our Nissan Maxima performance parts.

STILLEN Shop Installed 350Z Tein Coilovers

A set of Tein Coilovers with EDFC ACTIVE went into this 350Z. EDFC ACTIVE allows the driver to adjust dampening force from inside the car. This is controlled by step motors installed on each shock absorber.

G37 STILLEN Supercharger & Cross Drilled Sport Rotors Installation

The owner of this Malbec Black Infiniti G37 Convertible dropped in at the STILLEN shop and wanted a little more power, so he opted for the STILLEN VQ37 Supercharger System. This 50 state smog legal G37 Supercharger pushes the VQ37 to over 500 horsepower while retaining reliability!

Also bolted on a set of STILLEN Cross Drilled Sport Rotors to better slow down the additional horsepower.

350Z STILLEN Supercharger with Dyno Tune

Speaking of horsepower, this Nissan 350Z also got the STILLEN shop treatment with a STILLEN 350Z Supercharger System and Dyno Tune.

For more information about STILLEN or any of the thousands of products STILLEN carries, give us a call at (714) 540-5566 or visit http://www.stillen.com

More Mopar Monday

Jun 10, 2013

The black 2010 Dodge Challenger SRT8 we had in the STILLEN Performance Shop just a few weeks ago is back for a little upgrade. Seems like the Vortech Supercharger and Centerforce Clutch we installed is generating a little too much power for the suspension and brakes to handle.

The owner opted for a set of Eibach Multi-Pro R1 Coilovers and Eibach front and rear sway bars to tighten up the suspension.

After the Dodge Challenger SRT8’s upgraded Eibach suspension was in, It was time for the computer alignment and corner balancing final touches.

After the techs improved the cars ability to handle the twists and turns, it was time to improve the cars ability to handle the increased power. To achieve this the guys installed a set of DBA 4000 Series Drilled and Slotted Rotors paired with a set of Hawk Brake Pads and Goodridge Brake Lines for fade resistance and improved stopping power.

For more information on Dodge Challenger performance products available from STILLEN, give us a call at (714) 540-5566 or visit http://www.stillen.com

Ford Mustang Shelby GT 500 Suspension and Brake Upgrade

Jun 7, 2013

It’s not easy to improve a car like the Ford Mustang Shelby GT 500, but when the owner of this 550hp beast wanted to upgrade the suspension and brakes, he turned to the trained professionals at STILLEN’s Orange County Performance Shop for a proper install. Numerous upgraded parts including an Eibach Multi-Pro R2 Coilover Kit, Fays2 Suspension Watts Link, slotted brake rotors, and a carbon fiber intake kit were all waiting for their new home.

When the new slotted rotors were installed in the Shelby GT500, the caliper mounting brackets were changed out to compensate for the larger diameter brake rotors.

Shelby GT500 Eibach Multi-Pro R2 rear installed.

Front Eibach Multi-Pro R2 Coilovers going in.

Fays2 Suspension Watts Link was installed to eliminate unwanted lateral motion in the rear suspension of the Mustang Shelby GT500.

After the new Eibach Multi-Pro R2 Coilovers were installed, computer alignment was taken one step further and the Shelby GT500 was corner balanced for optimal handling.

White Hot: STILLEN Supercharged 370Z Nismo

May 29, 2013

I think it’s safe to say that most of you don’t get tired of seeing superchargers, especially when they go into a Nissan 370Z Nismo as clean as this one. Already having it’s share of mods, including the STILLEN 370Z Gen 3 Intake, the owner decided it was time to supercharge the VQ37.

The attention to detail on this white 370Z Nismo is very impressive. White powder coated front strut bar, flat black headlight housing with white projector rings, red carbon fiber interior accents, flat black wheels and white brake calipers are only a few of the custom touches that make this Z stand out.

The STILLEN 370Z Supercharger is a 50 State legal, bolt-on install that uses the Vortech V3 self-lubricating supercharger system. This force induction kit has shown a dyno proven increase to over 500 horsepower!

The 370z Supercharger was designed with OEM fitment in mind and clears the stock strut tower brace without any modification.

This Z looks happy to be supercharged.

For more information on the STILLEN 370Z Supercharger and other products for the entire Z family, visit http://www.stillen.com/ or call (866) 250-5542.

2011 Ford Edge Lowering Kit Installed

May 23, 2013

It’s not everyday a 2011 Ford Edge shows up in our shop, so we were excited when this black one, with monster 24″ wheels, came in wanting to reduce some of the wheel gap. The customer wanted to change the look without sacrificing the ride quality, so he opted for some H&R Sport Springs for his Ford Edge Sport.

Ford Edge with Rear H&R Springs Installed

Rear with H&R Sport Spring Installed

The 2011 Ford Edge H&R Sport Springs (Part #HR51605) are roughly a 1.75″ drop in the front and 1.5″ drop in the rear. In addition to reducing the wheel well gap, the Ford Edge H&R Sport Springs lower the center of gravity while reducing body roll for better handling. The Sport Springs have a progressive spring rate design which provides excellent ride quality and comfort.

The Ford Edge has some fairly large wheel wells, so even with the 24s there is plenty of room for the suspension to travel without rubbing.

For more information on H&R Suspension products or other suspension options for your vehicle, please call (866) 250-5542.

Prev 1...456...37 Next

Page 5 of 37

	39,822 Followers
	1,872 Followers
	4,964 Followers
	12,459 Subscribers
	318 Followers